Overview - Bulkhead
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
- Seal
- Install on the plenum chamber bulkhead
- Lock Washer
- Quantity: 2
- Nut
- 4 Nm
- Plenum Chamber Bulkhead
- There are different versions.
- Removing and installing. Refer to PLENUM CHAMBER BULKHEAD, REMOVING AND INSTALLING .
- Terminal 30 Wire Junction -TV2-
- Removing and Installing. Refer to[For engine(s) CTUA,CEUC,CRDB,CGXB,CPNB] Removal and Installation .
- Nut
- Tightening specification. Refer to[For engine(s) CTUA,CEUC,CRDB,CGXB,CPNB] Removal and Installation .
- Cable Bracket
- There are different versions.
- Screw
- 2 Nm
- There are different versions.
- Heat Shield
- Overview. Refer to OVERVIEW - HEAT SHIELD .