Windshield Wiper Motor, Tightening Specifications and Sequence

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Tightening Specifications And Sequence For Windshield Wiper Motor

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in -1, 2, 3- sequence in 2 stages as follows:

1. Install by hand as far as the stop.

2. Tighten to 8 Nm.