LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Heating, Ventilation & Air Conditioning (A/C Compressor & Actuators)) >> 87 Air Conditioning >> A/C Compressor >> Drive Plate With Overload Protection, Removing And Installing >> Removing

Drive Plate With Overload Protection, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Bolts, Overload Protection -B-, And Drive Plate -C-
GWWA87-0623Courtesy of AUDI OF AMERICA, LLC

-- Remove the A/C compressor, refer to A/C COMPRESSOR, REMOVING AND INSTALLING, VEHICLES WITH 8-CYLINDER FSI/TFSI ENGINE .

-- Counterhold the drive plate -C- with a commercially available strap wrench (with webbed band) to remove the bolts -A-.

scientia non olet · About LEMON Manuals