Right Seal, Replacing
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Seal Installer - Flange Shaft :T40163
- Pry lever
- Grease.
-- Remove the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .
-- Pry out the flange shaft sealing ring -arrow-.
-- Lightly coat the outer circumference of the new shaft seal with oil.
-- Drive in the right flange shaft seal using the Seal Installer - Flange Shaft :T40163 until stop without tilting.
-- Fill the space between the sealing- and dust lip half way with sealing grease.
-- Install the right flange shaft. Refer to RIGHT FLANGE SHAFT, REMOVING AND INSTALLING .