LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Differential System & Final Drive System (General & Service Information - 7-Speed Dual Clutch - 0B5)) >> Final Drive, Differential >> Final Drive >> Overview - Final Drive >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

-- Tighten the bolts in three steps in the sequence shown:

Step Bolts Tightening Specification/Additional Turn
1. -1 to 10- 3 Nm
2. -1 to 10- 20 Nm
3. -1 to 10- Tighten an additional 90°
scientia non olet · About LEMON Manuals