Left Flange Shaft, Removing And Installing: Removing
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Secure the transmission on the Engine And Transmission Holder :VAS6095 . Refer to SECURING ON ENGINE AND TRANSMISSION HOLDER .
-- Tilt the transmission back on the engine/transmission holder so the transmission fluid does not drain out.
-- Remove the bolts -arrows- from the flange shaft mounting bracket.
-- Remove the left flange shaft -2- from the transmission in direction of -arrow A-.
NOTE:
Ignore -1- and -arrow 3, B-.
-- Remove the flywheel FLYWHEEL, REMOVING AND INSTALLING .