LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 134 (Differential System & Final Drive System (General & Service Information - 7-Speed Dual Clutch - 0B5)) >> Final Drive, Differential >> Center Differential >> Transmission Output Shaft Seal, Replacing >> Transmission Output Shaft Seal, Replacing, Transmission Output Shaft With Splines With Vibration Damper

Transmission Output Shaft Seal, Replacing, Transmission Output Shaft With Splines With Vibration Damper

WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

The transmission output shaft with splines on vehicles with a vibration damper must be removed in order to replace the transmission output shaft seal with splines.