Tightening Specifications
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Tighten the bolts in eight steps as follows:
| Step | Bolts | Tightening Specification/Additional Turn |
|---|---|---|
| 1. | Aluminum bolts -1- | 8 Nm |
| 2. | Aluminum bolts -2- | Install the bolt hand-tight. |
| 3. | Aluminum bolts -1- | Loosen again and then install all the way hand-tight |
| 4. | Aluminum bolts -3- | Install the bolt hand-tight. |
| 5. | Steel bolts -4- | Install the bolt hand-tight. |
| 6. | -1, 2, 3, 4- | 10 Nm diagonally |
| 7. | Steel bolts -4- | 15 Nm |
| 8. | -1, 2, 3, 4- | 90° additional turn, diagonally |