4. Replacing The Dual Clutch
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Dual clutch, removing and installing information not available at this time. .
The following steps must be performed after completing this procedure:
-- Under Guided Functions in the directory 02 - Transmission Electronics , select the Basic Setting (Control Housing) - "Guided Function" .
-- Select the basic setting Adapt Clutch Slip Points and then follow the instructions given on the Vehicle Diagnostic Tester.