3. Replacing The S Tronic Transmission Mechatronic -J743- And Transmission Control Module -J217-
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Direct Transmission Mechatronic -J743-, Removing and Installing. Refer to MECHATRONIC, REMOVING AND INSTALLING .
The following steps must be performed after completing this procedure:
-- Select Guided Functions in the directory 02 - Transmission Electronics and the Replace Control Module/Mechatronic - "Guided Function" and then follow the instructions given on the Vehicle Diagnostic Tester.