Right Flange Shaft, Removing And Installing: Notes
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Bearing/Bushing Installer - Multiple Use :VW295
- Slide Hammer Set :VW771
- Slide Hammer Set - Pulling Hook :VW771/13
- Lifting Eyebolt :3368
- Used Oil Collection and Extraction Unit :SMN372500
- Grease.
- M10 nut, quantity: 2
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Circlip - Right Flange Shaft