LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Brake System - General & Technical Data) >> 00 General, Technical Data >> Brakes Inspection >> AWD Vehicles

AWD Vehicles

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Testing on a one-axle roller test stand for AWD vehicles

During this test, the wheels of one axle are driven in opposite directions, to prevent delivering power to the other axle.

The test speed must not exceed 6 km/h (4 mph), otherwise, the brakes may lock up due to the roller start-up delay (EDL regulation).

WARNING: If the test speed exceeds 6 km/h (4 mph) the Torsen differential will be destroyed.

Test stands approved by Audi meet these requirements.

Test on a one-axle roller test stand

The test speed must not exceed 6 km/h (4 mph), otherwise, the brakes may lock up due to the roller start-up delay (EDL regulation).

Test stands approved by Audi meet these requirements.