LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Engine System (Cylinder Head & VALVETRAIN - Service Information - TDI 3.0L - CPNB)) >> Cylinder Head, VALVETRAIN >> VALVETRAIN >> Overview - VALVETRAIN >> Tightening Specifications >> Notes

Tightening Specifications: Notes

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Camshaft External Bracket Tightening Specifications
GWWA15-11032Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in two steps in the sequence shown.

Step Bolts Tightening Specification
1. -1 to 12- Install all the way in by hand.
2. -1 to 12- 9 Nm
scientia non olet · About LEMON Manuals