Tightening Specifications: Notes
WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of AUDI OF AMERICA, LLC
NOTE:
Replace the bolts that were tightened with an additional turn.
-- Tighten the bolts in three steps and in the sequence shown:
| Step |
Bolts |
Tightening Specification/Additional Turn |
| 1. |
-1 to 7- |
Install all the way in by hand. |
| 2. |
-1 to 7- |
8 Nm |
| 3. |
-1 to 7- |
Tighten an additional 90° |