Tightening Sequence

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Replace the bolts that were tightened with an additional turn.

-- Tighten the bolts in three steps and in the sequence shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 to 12-	2 Nm
2.	-1 to 12-	5 Nm
3.	-1 to 12-	Tighten an additional 90°