Overview - Engine Oil Cooler: Notes

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Engine Oil Cooler, Coolant Shut-Off Valve

Fig 1: Exploded View Of Engine Oil Cooler

Courtesy of AUDI OF AMERICA, LLC

Seals
- For the mounting plate
Mounting Plate
- For the engine oil cooler
Bolt
- 9 Nm
Seal
- For the engine oil cooler
- Always replace
Bolt
- 9 Nm
Engine Oil Cooler
- See NOTE: Refer to OVERVIEW - OIL PAN/OIL PUMP .
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING .
Coolant Shut-Off Valve
- Removing and installing. Refer to COOLANT SHUT-OFF VALVE, REMOVING AND INSTALLING .
Bolt
- Tightening specification -Item 3- OVERVIEW - COOLANT VALVE .
Seal
- Always replace
- For the shut-off valve

Engine Oil Cooler Thermostat

Courtesy of AUDI OF AMERICA, LLC

Cover
- For the temperature regulator for the engine oil cooler
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .
Bolt
- Tightening specification and sequence. Refer to figure in Tightening Sequence .
- Always replace
O-ring
- Always replace
Engine Oil Cooler Thermostat
- Removing and installing. Refer to ENGINE OIL COOLER THERMOSTAT, REMOVING AND INSTALLING .
Sealing Flange
- Belt pulley side
- Removing and installing. Refer to SEALING FLANGE, REMOVING AND INSTALLING, BELT PULLEY SIDE .