LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 123 (Glow Plug System (Service Information - TDI 3.0L - CPNB) (1 Of 2)) >> 28 Ignition/Glow Plug System >> Glow Plug System >> Glow Plugs, Removing And Installing >> Installing

Glow Plugs, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Carefully install the glow plugs by hand or with a hose without tilting it.

-- Tighten the glow plugs using the Glow Plug Socket :3220  and a suitable torque wrench. Refer to Tightening specification .

scientia non olet · About LEMON Manuals