Engine Speed Sensor -G28-, REMOVING AND INSTALLING: Removing

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the rear noise insulation -2-, refer to NOISE INSULATION . .

Vehicles With Multitronic 0AW

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Remove the bolt -2- and the Engine Speed Sensor -G28-.

Vehicles With S Tronic Transmission 0B5

Courtesy of AUDI OF AMERICA, LLC

-- Remove bolts -arrows- and move the ATF cooler slightly to the side.

-- Disconnect the connector -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the Engine Speed Sensor -G28-.