Passenger Occupant Detection System Deactivation After A Collision, Market-Specific

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.

Each time an airbag or passenger belt tensioner deploys, a basic setting must be performed on the seat occupied recognition control module. Refer to Vehicle Diagnostic Tester.
If the seat rails and/or seat pan is replaced after an accident due to deformations resulting from a crash, the passive occupant detection system must be replaced using the "passive occupant detection system service kit". Perform a "basic setting" on the passenger occupant detection system control module using the Vehicle Diagnostic Tester.