Sensor Wheel, Checking
WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Gauge - Sender Wheel :T10473
CAUTION:
There is a risk of destroying the sensor wheel by magnetic force.
- Do not place the sensor wheel near magnets (for example inspection lamp base, or speakers).
- If the drive plate/flywheel or the sensor wheel removes on its own or is replaced, before installing the sensor wheel function must be checked. Refer to SENSOR WHEEL, CHECKING .
- Sensor wheel removed.
-- As shown in the illustration below, check the entire circumference of the sensor wheel with the :T10473 .
Sensor wheel test diagram
A - Sensor wheel OK
B - Sensor wheel faulty