Ribbed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Ribbed Belt Routing

Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal. Note the following:

-- Mount the ribbed belt over the pulley.

Generator
Idler roller
Idler roller
Coolant pump
A/C compressor
Ribbed belt tensioning damper
Vibration damper

NOTE:

When installing the ribbed belt, make sure it is seated correctly on the pulleys.

-- Start the engine and check the belt routing.