LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 118 (Engine System (Crankshaft & Cylinder Block - Service Information - TDI 3.0L - CPNB)) >> Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Auxiliary Components Bracket, Removing And Installing >> Removing

Auxiliary Components Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Drain the coolant. Refer to COOLANT, DRAINING AND FILLING .

-- Remove the Air Conditioning (A/C) compressor. Refer to A/C COMPRESSOR .

-- Remove the bolts -arrows- and the A/C compressor bracket.

GWWA13-10869Courtesy of AUDI OF AMERICA, LLC
NOTE:

Ignore items -1 and 2-.