Tightening Specifications

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Turbocharger Tightening Sequence (1 Of 3)

GWWA21-10603

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps in the sequence shown:

Step	Bolts	Tightening Specification
1.	-1 to 8-	16 Nm
2.	-1 to 8-	25 Nm

Fig 2: Turbocharger Tightening Sequence (2 Of 3)

GWWA21-10604

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps in the sequence shown:

Step	Bolts	Tightening Specification
1.	-1 to 8-	16 Nm
2.	-1 to 8-	25 Nm

Fig 3: Turbocharger Tightening Sequence (3 Of 3)

GWWA21-10706

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps in the sequence shown:

Step	Bolts	Tightening Specification
1.	-1 to 3-	5 Nm
2.	-1 to 3-	25 Nm

4 -Turbocharger Support

GWWA24-11080

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolt -2- to 9 Nm.

GWWA21-10701

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the nut -arrow- to 9 Nm.