Charge Air Cooler, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Follow all the rules of cleanliness. Refer to CLEAN WORKING CONDITIONS .
-- Support the engine in its installed position. Refer to ENGINE, SUPPORTING IN INSTALLED POSITION .
-- Lift the engine using the :10-222A/11 -1- to dimension -a-.
- Dimension -a- = approximately 15 mm.
NOTE:
Use a cloth to catch any leaking coolant.
-- Loosen the hose clamps -1-, then clamp off the coolant hoses with the :3094 and then remove them.
-- Remove the bolts -arrows- and then remove the charge air cooler from the charge air cooler housing.