LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Engine System (Crankshaft & Cylinder Block - Service Information - 4.0L - CEUC, CRDB, CTGE, CWUB, CWUC)) >> Crankshaft, Cylinder Block >> Piston And Connecting Rod >> Overview - Piston And Connecting Rod >> Oil Spray Jet For Piston Cooling

Oil Spray Jet For Piston Cooling

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-10908Courtesy of AUDI OF AMERICA, LLC
  1. Insert screws with locking compound and tighten to 9 Nm. For locking compound.
  2. Oil spray jet
CAUTION:

The oil spray jets could get damaged.

  • Do not bend the oil injector jets.
  • Check that the oil spray jet is accessible after reinstalling the pins.
  • Bent oil injector jets must be replaced.
scientia non olet · About LEMON Manuals