Guide Frame Tightening Specifications & Sequence

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Glide track -Item 1) TIMING MECHANISM DRIVE CHAIN - for the timing mechanism drive chain is removed.
The oil filter is removed.

NOTE:

Replace any bolts that were tightened with an additional turn.

-- Insert the long bolts in the interior and the short bolts in the exterior.

-- Tighten the bolts in steps in the sequence shown:

Step	Bolts	Tightening Specification/Additional Turn
1.	-1 through 10-	30 Nm
2.	-11 to 20-	30 Nm
3.	-1 through 10-	50 Nm
4.	-1 through 10-	Tighten an additional 90°
5.	-11 to 20-	50 Nm
6.	-11 to 20-	Tighten an additional 90°
7.	without numbering in the illustration	9 Nm diagonally