Cylinder Bank 2 (Left)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Intake camshaft
- Exhaust camshaft
- The surfaces with the threaded openings -arrows- must face a little towards the right and towards the engine center.
- The camshafts almost set themselves into the correct position.
CAUTION:
The engine could be damaged.
- The camshaft spacers must be brought into the installed position.
-- Bring the camshaft spacers into the installed position -arrows- :
- The spacers must be slid respectively towards the center of the camshafts.