Cam Actuator, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
CAUTION:
The engine could be damaged.
- Bring all of the pins for all of the cam adjustment actuators into the installed position.
-- Press down the cam adjustment actuator pins in direction of -arrow- by hand.
- The pins for all of the adjusting elements must not be in the outward position.
-- Install the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .