Overview - Left Camshaft Timing Chain
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 80 Nm + 90°
- Always replace
- Bolt
- 80 Nm + 90°
- Always replace
- Camshaft Adjuster
- For the intake camshaft
- Designation "IN"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Camshaft Adjuster
- For the exhaust camshaft
- Designation "EX"
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Left Camshaft Timing Chain
- Mark the running direction with paint for reinstallation
- Removing from the camshafts. Refer to CAMSHAFT TIMING CHAIN, REMOVING FROM CAMSHAFTS .
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN, REMOVING AND INSTALLING .
- Bolt
- 5 Nm + 90°
- Always replace
- Glide
- Chain Tensioner
- For the left camshaft control chain
- Removing and installing. Refer to CAMSHAFT TIMING CHAIN TENSIONER, REMOVING AND INSTALLING .
- Bearing Plate
- For the drive chain sprocket
- Bolt
- 9 Nm
- Drive Chain Sprocket
- For the left camshaft control chain
- Mounting Pin
- Left camshaft timing chain drive sprocket
- Bolts
- 5 Nm + 90°
- Always replace