Oil Pump, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Transmission removed. Refer to TRANSMISSION, REMOVING AND INSTALLING - 0B5, or TRANSMISSION, REMOVING AND INSTALLING - 0BK.
-- Remove the spur gear unit. Refer to SPUR GEAR DRIVE, REMOVING AND INSTALLING .
-- Remove the coolant pump. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
-- Remove the oil pan lower section. Refer to OIL PAN LOWER SECTION, REMOVING AND INSTALLING .
-- Place the :SMN372500 under the engine and leave it there for the following steps.
-- Remove the bolts -arrows- and the oil pipe.
NOTE:
Oil escapes when removing oil pipes.
-- Remove the bolt -arrow- and remove the intake tube.
-- Remove the bolts -arrows- and remove the oil pump.