Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Engine oil is drained. Refer to ENGINE OIL, DRAINING AND REPLACING FILTER and ENGINE OIL, DRAINING .
-- Disconnect the connector -3-.
-- Remove the bolts -1- and the Oil Level Thermal Sensor -G266- -4-.