LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Engine Lubrication System (Service Information - 4.0L - CEUC, CRDB, CTGE, CWUB, CWUC)) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING >> Installing

Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

NOTE:

Replace the seal -2-.

-- Fill with engine oil and check the oil level. Refer to ENGINE OIL LEVEL, FILLING AND CHECKING and ENGINE OIL, FILLING .