Mechanical Switch Valve, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the cover in the Inner-V. Refer to COVER IN THE INNER-V, REMOVING AND INSTALLING .
-- Remove the plug -arrow-.
-- Pull simultaneously at the valve -arrow- with a magnetic bar to push the mechanical switch valve with the hooks -1- through the opening toward the outside as shown in the illustration.