LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 112 (Engine Lubrication System (Service Information - 4.0L - CEUC, CRDB, CTGE, CWUB, CWUC)) >> 17 Lubrication >> Oil Circuit >> Cover In The Inner-V, Removing And Installing >> Installing

Cover In The Inner-V, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Identifying Oil Screen 

GWWA17-10741Courtesy of AUDI OF AMERICA, LLC

Install in reverse order of removal and note the following:

NOTE:

Replace the seal and O-rings.

Secure all hose connections with hose clamps that match the ones used in series production.

Replace the oil screen in the cover for the Inner V.

-- Install the oil screen -arrow- and install it in the cover.

-- Install the charge air cooler housing. Refer to CHARGE AIR COOLER HOUSING, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals