Overview - Engine Oil Cooler, Front Engine Oil Cooler
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2018 Audi S7, 2018 Audi RS 7, 2017 Audi S7, 2017 Audi RS 7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- O-rings
- Always replace
- Bolt
- Tightening specification and sequence. Refer to Fig 1.
- Engine Oil Cooler
- Removing and installing. Refer to ENGINE OIL COOLER, REMOVING AND INSTALLING, FRONT .
- Change the coolant after replacing
-- Tighten bolts in stages as follows:
| Step | Bolts | Tightening Specification |
|---|---|---|
| 1. | -1 to 7- | 3 Nm |
| 2. | -1 to 7- | 9 Nm |