Securing On Engine And Transmission Holder: Procedure
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
- Hold the transmission with the Shop Crane :VAS6100 . Refer to TRANSMISSION, TRANSPORTING .
-- Attach the Holding Plate :VW309A to the Hook And Support Tool :T40197 .
-- Place the transmission using the Shop Crane :VAS6100 in the Engine And Transmission Holder :VAS6095 .
NOTE:
The vents for the transmission housing and final drive must be closed before turning a filled transmission with oil pan upward on the engine and transmission holder.