The Transmission is Installed
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulations -1 and 2-. Refer to NOISE INSULATION .
CAUTION:
Danger of Causing Damage to the Transmission.
- Do not start the engine if there is no ATF in the transmission or if the DSG Transmission Mechatronic -J743- is removed.
-- Move the selector lever into "P".
-- Turn off the ignition and remove the key.
-- Turn the twist lock counter-clockwise in direction of -arrow- and disconnect the connector from the transmission.