LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Transmission Controls System (Service Information - 7-Speed Dual Clutch - 0B5)) >> 34 Controls, Housing >> MECHATRONIC >> MECHATRONIC, Removing And Installing >> Removing >> Notes

MECHATRONIC, Removing And Installing: Removing: Notes

WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

General repair instructions. Refer to REPAIR INFORMATION .

Rules for cleanliness when working on the DSG transmission. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

CAUTION:

There is a risk of destroying the transmission control module (Mechatronic) with static discharge.

  • Always "discharge" the static electricity before working with electric connectors. Do this by touching a grounded object, for example vehicle ground, the vehicle or the hoist.
  • Do not touch contacts in transmission connector with hands.
scientia non olet · About LEMON Manuals