Transmission, Removing, Vehicles With 6-Cylinder Gasoline Engine: Notes
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry lever :80-200
- Engine and Gearbox Jack :VAS6931
- Tensioning Strap :T10038
- Motor Transport Loop :T40016
- Crankshaft Socket :T40058
- Gearbox Support :T40173
- M8 x 20 bolt
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolt - Starter
- Bolts - Transmission
Preparing the :T40173 :
-- The bracket attached to -item 1- must be removed.
-- The bracket -item 2- must be turned so that the longer side faces up as illustrated.