LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Transmission Controls System (Service & Specification Information - 7-Speed Dual Clutch - 0B5)) >> 34 Controls, Housing >> Transmission, Removing And Installing >> Transmission Tightening Specifications >> S tronic Transmission to the 8-Cylinder Gasoline Engine

S tronic Transmission to the 8-Cylinder Gasoline Engine

WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA34-10471Courtesy of AUDI OF AMERICA, LLC
Item Bolt Tightening Specifications
1 1) M10x50 2) 65
2 1) , 3 to 6 M12x100 3) 30 Nm + 90°
7 M12x175 3) 30 Nm + 90°
8, 9 and 10 M10x60 3) 15 Nm + 90°
A Alignment sleeves for centering
  • 1) Mount the auxiliary adapter
  • 2) Bolt strength rating 10.9. There is no limit to the number of times steel bolts may be used.
  • 3) The bolts may be used 2 times, refer to Aluminum Bolts -2 through 10- .
scientia non olet · About LEMON Manuals