Transmission Tightening Specifications: \\

WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Item	Bolt	Tightening Specifications
1 ¹⁾	M10 x 50 ²⁾	65 Nm
2 ³⁾ , 7	M12 x 100 ⁴⁾	30 Nm + 90°
3	M12 x 75 ⁴⁾	30 Nm + 90°
4, 5	M12 x 120 ⁴⁾	30 Nm + 90°
6	M12x85 ⁴⁾	30 Nm + 90°
8, 9	M10 x 40 ⁴⁾	15 Nm + 90°
10	M12 x 50 ⁴⁾	30 Nm + 90°
A	Alignment sleeves for centering
¹⁾ Mount the auxiliary adapter ²⁾ Bolt strength rating 10.9. There is no limit to the number of times steel bolts may be used. ³⁾ Also secures that starter; with an additional spacer sleeve between the starter and the transmission. ⁴⁾ The bolts may be used 2 times, refer to Aluminum Bolts -2 through 10- .