LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 110 (Transmission Controls System (Service & Specification Information - 7-Speed Dual Clutch - 0B5)) >> 34 Controls, Housing >> Specifications >> Fastener Tightening Specifications >> S tronic Transmission on the 6-Cylinder or 8-Cylinder Gasoline Engine

S tronic Transmission on the 6-Cylinder or 8-Cylinder Gasoline Engine

WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
GWWA34-10471Courtesy of AUDI OF AMERICA, LLC
Item Bolt 1 Specifications
1 (1) M10x50 (2) 65 Nm
2 (1), 3, 4, 5, 6 M12x100 (3) 30 Nm + 90°
7 M12x125 (3) 30 Nm + 90°
8 M10x60 (3) 15 Nm + 90°
9, 10 M10x95 (3) 15 Nm + 90°
A Alignment sleeve for centering
  • (1) Mount the auxiliary adapter
  • (2) Bolt strength rating 10.9. There is no limit to the number of times steel bolts may be used.
  • (3) The bolts may be used two times, refer to Aluminum Bolts -2 through 10- .