Oil Pan, Removing And Installing: Installing: Notes
WARNING: This page is about a different car, the 2018 Audi S7, 2017 Audi S7, and 2016 Audi S7. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal. Note the following:
-- Clean the sealing surfaces.
-- Replace the ATF oil pan bolts and gasket.
-- Insert the guides -arrow- on the new gasket -2- into the ATF fluid pan -1-.
-- Attach the gasket and clips -3- to the ATF pan.
NOTE:
Clips -item 3- are only used for assembly help during production!
-- Clean the magnets -arrows- in the ATF pan.
-- Make sure the magnets completely contact the depressions in the ATF oil pan.
-- Tighten the ATF pan bolts. Refer to MECHATRONIC , or Mechatronic .