Front Air Suspension Strut, Emptying
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2015 Audi S7, 2015 Audi RS 7, 2015 Audi A7 Quattro, 2014 Audi S7, and 2014 Audi RS 7. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pressure Retention Socket T10158/1
-- Remove the front air spring shock absorber, refer to SUSPENSION STRUT, REMOVING AND INSTALLING, AIR SPRING DAMPER .
-- Slowly open the residual pressure retaining valve -2- on the front air spring shock absorber and allow the air pressure to escape.
NOTE:
The air spring shock absorber is shown in its installed position.
-- Dispose of the air spring damper.