Tightening Specifications

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Intake Manifold Tightening Sequence (1 Of 2)

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in three steps as follows:

Step	Bolts	Tightening Specification
1.	-1 through 4-, -arrows-	Install all the way in by hand.
2.	-1 through 4-	5 Nm in sequence shown
3.	-1 through 4- and -arrows-	9 Nm in any sequence

Fig 2: Intake Manifold Tightening Sequence (2 Of 2)

Courtesy of AUDI OF AMERICA, LLC