LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 109 (Fuel Injection System (Diesel - Service Information - TDI 3.0L - CPNB)) >> 23 Diesel Fuel Injection >> Fuel Injection System >> Component Location Overview - Fuel Injection System >> Component Location Overview - Injection System, Vehicles With Two Turbochargers >> Engine Front

Engine Front

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
GWWA23-10683Courtesy of AUDI OF AMERICA, LLC
  1. - Oil Level Thermal Sensor -G266-
  2. - Map Controlled Engine Cooling Thermostat -F265-
    • Integrated in the oil filter housing; cannot be replaced separately
  3. - Oil Temperature Sensor 2 -G664-
  4. - Oil Pressure Switch -F22-
  5. - Reduced Oil Pressure Switch -F378-
  6. - EGR Cooler Switch-Over Valve -N345-
  7. - Intake Flap Motor -V157-
  8. - Throttle Valve Control Module -J338-
  9. - Turbine Switch-Over Valve -N529-
  10. - Engine Temperature Control Sensor -G694-
    • Component location  3
  11. - Oil Pressure Regulation Valve -N428-
  1. - Fuel Pump Control Module -J538-
  2. - Reducing Agent Injector -N474-
  3. - NOx Sensor -G295- with NOx Sensor Control Module -J583-
  4. - NOx Sensor 2 -G687- with NOx Sensor Control Module 2 -J881-
  5. - Reducing Agent Metering System Control Module -J880-
    • Only installed on vehicles with a selective catalytic reduction system (SCR)