LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A7 Quattro Competition >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Fuel Injection System (Diesel - General & Service Information - TDI 3.0L - CPNB)) >> 23 Diesel Fuel Injection >> Sensors >> Mass Airflow Sensor -G70-, REMOVING AND INSTALLING >> Tightening Specifications

Tightening Specifications

WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Following the information and procedures exactly will assure the Mass Airflow Sensor -G70- works correctly.

NOTE:

If the air filter is very dirty or soaked, dirt particles or moisture may have contaminated the Mass Airflow Sensor -G70- and may be causing false mass airflow values. This results in a reduction of power, since a lower injection quantity is calculated.

Replace damaged mass airflow sensor seal (false air).

Secure all hose connections with hose clamps of the same type as those equipped by the factory.