Mass Airflow Sensor -G70-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Disconnect the connector -1-.
-- Open the clamps -arrows- and remove the air guide pipe -1-.
-- Unlock the retainer -1-, turn the cover on the air filter housing with the Mass Airflow Sensor -G70- counterclockwise -arrow A- and remove it.
-- Open the retainer and disconnect the Mass Airflow Sensor -G70- from the cover.