Fuel Pressure Sensor -G247-, REMOVING AND INSTALLING: Notes
WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Socket - 27mm :T40218
- Torque wrench
NOTE:
The Fuel Pressure Sensor -G247- measures the actual fuel pressure in the high pressure system and delivers a voltage signal to the Engine Control Module -J623-.
If the malfunctions, the pressure is controlled via an Engine Control Module (ECM characteristic map (maximum engine speed is limited to emergency operation mode).
The Fuel Pressure Sensor -G247- has a biting edge as a seal.