Fuel Tank, Filling With Fuel After Installing High Pressure Pump: Notes
WARNING: This page is about a different car, the 2016 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Vehicle Diagnostic Tester
CAUTION:
Letting the high pressure pump run dry will damage it.
- The high pressure pump must be filled with fuel after installing, but before the engine is started for the first time.
NOTE:
When installing, make sure that no dirt enters the fuel system.
Only remove the sealing plugs right before installing the fuel lines.
The fuel tank must be filled.